Getein One Step Covid 19 Test for SARS-CoV-2 Antigen

Key Details

• One Step Test for SARS-CoV-2 Antigen (Collodial Gold) intended for qualitive detection of SARS-CoV-2 antigens in human nasal swab samples.
• This test can be used as a self-test at home or at work without the need for a healthcare professional.
• Evaluated by PHE Porton Down and University of Oxford SARS-CoV-2 lateral flow antigen test validation cell passing Phase 3 testing on 10th March 2021. Available to view here
• This item line is exempt from our usual returns policy. This item is non-returnable or exchangeable.
• Store at room temperature (4-30ºC)
• Variants detected - please see the "Technical Information" tab - Updated as of 9th October 2022

Features:

• Non-invasive sampling (Nasal Swab)

• Rapid test - results in 10-15 minutes 

• Read test results visually, no test equipment needed

• Early detection of SARS-CoV2 infection

• Simple operation, easy to learn and use

• Diagnostic Sensitivity 97.06%

• Diagnostic Specificity 98.71%

• Total Percentage Agreement 98.13%

• Please refer to video below, and also the brochure and instructions below.

Click here for full instruction video 

Test results:

• POSITIVE - The presence of two lines as control line (C) and test line (T) within the result window indicates a positive result.
• NEGATIVE* - The presence of only control line (C) within the result window indicates a negative result.
• INVALID - If the control line (C) is not visible within the result window after performing the test, the result is considered invalid. Some causes of invalid results are because of not following the directions correctly or the test may have deteriorated beyond the expiration date. It is recommended that the specimen be re-tested using a new test.
  Note: The intensity of colour in the test line region (T) may vary depending on the concentration of analytes present in the specimen. Therefore, any shade of colour in the test line region (T) should be considered positive. Please note that this is a qualitative test only and cannot determine the concentration of analytes in the specimen. Insufficient specimen volume, incorrect operating procedure or expired tests are the most likely reasons for control band failure.

IMPORTANT INFORMATION